Decorative Painting & Wall Finishes for Manhattan Homes
Color, Texture & Light
A wall sets the tone for everything beside it. Chalky pigment softens the edge of oak millwork. Satin enamel picks up the profile of an original door casing. A warm, troweled surface gives veined stone and woven linen room to breathe.
Remodel NY applies decorative paint, faux finishes, limewash, Roman clay and Fine Paints of Europe coatings in Manhattan co-ops, condos and townhomes. We choose color, texture and sheen together, in the light of the room.
Choosing a Finish
Limewash dries to a chalky matte with soft, overlapping brush marks. In a bedroom, morning light draws out the pale shifts in tone. At night, lamplight softens them behind linen and oak.
Roman clay has a denser, smoother surface, with shallow traces of the trowel. In daylight it reads like honed stone. Under evening sconces, a warm clay tone lends depth to a fireplace wall.
For paneled doors and millwork, satin enamel gives profiles a restrained glint. A higher gloss makes reflections sharper and calls for a smoother base. For busy rooms, we weigh washability and how a finish can be touched up.


Wall Preparation
Low daylight can rake across a long Manhattan living room or ceiling, revealing the edge of an old patch or the ridge of a drywall seam. We inspect surfaces in that light, repair sound plaster and drywall as needed, and skim coat where a more continuous plane is called for.
Thin coats are feathered and sanded so repairs blend into the surrounding surface. The appropriate primer helps even out absorption, so the finish reads consistently across old and new work.
Finish Samples
A sample should be large enough to show the sweep of a brush or the overlap of a trowel. We review it beside the room’s stone, millwork and fabrics in daylight and with the lights you use after dark. That is where we decide how much movement, warmth or sheen feels right.
Let’s Talk Finishes
Tell us which room you’re considering and what you want to bring forward: the grain of the wood, the edge of a molding, or the way the wall looks at dusk. We’ll talk through finishes, preparation and what to sample first.
Call 917-734-1179 to discuss your project.
Our Process
Pre-Construction
-
Review the room’s light and existing surfaces
Compare finishes and sample locations
Confirm scope, timing and building access
Construction
-
Protect floors, millwork and furnishings
Repair, skim and prime as needed
Apply the approved finish and check edges in raking light
Post-Construction
-
Walk the room together in daylight and under its fixtures
Review cleaning, care and future touchups
